| Matters Needing Attention When K-kit in Use |
(4).PNG) |
Inspection Before Use
- With Newton’s rings on the membrane. (Be sure the channel to keep vacuum sealed)
- Free of any damage on Silicon body of K-kit.
| .PNG) |
| |
Channel Tips Removal - Be sure to remove both the channel tips before using K-kit.
- It should be finished the liquid loading within 0.5 hour, after breaking the channel tips.
|  |
| |
Liquid Loading
- Keep the K-kit steadily touching on liquid for around 1 minute, to allow the filling to complete.
- Do not immerse the K-kit in liquid.
|  |
| |
Gluing Process
- Glue both ends of the channel within 1 minute after liquid loaded.
- Be sure not to do the channel gluing step, if making for Thin Layer mode of K-kit.
- Doing the gluing step with care, to avoid the glue flowing into the observation window.
|  |
| |
(2).PNG){kind=small}